An easy way to setting mikrotik hotspot is there are 2 (two) using the text mode option but we can also use the settings wizard by using Winbox Router OS, step-Langkat The following is a basic configuration mikrotik hotspot as a Gateway Server. First install Mikrotik Router OS on a PC or connect the DOM or if using immediately wrote Rouer Board Login = 'admin' for password while you leave blank for default.
Go to the IP ==> Hotspot ==> Setup
Then specify the local IP stew that will be used, for example 192.168.10.1 and IP Set to DHCP clientnya you will use, in this example is 192.168.10.2-192.168.10.255
For the SMTP server you should just leave blank, then your DNS server fill customize your Provider, in this example is DNS1 = DNS2 = 202.47.78.9 202.47.78.1
NEXT hotspot your local DNS alone then on your user Hotspot in the following example filled admin password admin123
Hotspot Server Profile used for setting up a server that will be frequently used as a method for all user authentication and data rate limitation. There are 6 types of different authentication mikrotik hotspot in the profile settings, type autentikas are: HTTP PAP, HTTP CHAP, HTTPS, HTTP cookies, MAC address, Trial
Authentication methods to be used, is usually sufficient to use the HTTP method CHAP
Limitation of data rate is used as the default setting for users who have not been in setting limit bandwidth usage. Where is the RX and TX is upload Client Client download. For example the default setting in 64k/128k data rate (upload / download)
Hotspot user profile is used to store user data that will be made profilenya rule. Where in it can be done setting the filter chain for firewall traffic in / out, also can be used for setting up the data rate limitation and in addition can also be marking package for each user who entered into the profile automatically.
Hotspot users are user names that will be authenticated on the system hotspot. Some things to do in the configuration of the hotspot user: username and password, Limiting user based on the time and the packet data to be used, only certain ip address dhcp ip address from being offered or only allow a user to connect to a hotspot system from a particular MAC address .
IP Bindings are used to allow certain ip to bypass authentication hotpot, is very useful when we want to run the service server, or IP telephony system under hotspot. For example, your PC or notebook to be able to bypass the hotspot system, so you can browse without authentication
That means setting mikrotik hotspot with the above tutorial may help you all, who want to learn how high mikrotik